Super Small Torque 24VDC DN65 2 Piece Sanitary Ball Valve

2-piece electric actuated thread connection type ball valve / investment cast body

Features

2-piece ball valve

• Two-piece high platform design with ISO 5211 direct actuator mounting
• CF8, CF8M stainless steel available
• RTFE, PTFE soft seal optional, two stages sealing design to ensure no leakage
• Size from DN15 to DN50, 1/2” to 2”
• Pipe pressure PN up to 1000psi, 6.5Mpa
• Blowout proof stem
• Super small torque design
• Threads end for NPT, BSPT, BSPP, JIS standard available

Electric actuator

• Heavy duty AC motor for 24VAC/110VAC/220VAC, with thermal overload protection
• Rear earth material permanent magnet DC brush motor for 24VDC, with thermal overload protection
• All metal double worm gears and two stage spur gears, self-locking at any position
• Rugged IP67 high pressure die cast aluminum alloy housing with powder coated
• Standard 90° operation with mechanical limits, 360° and multi-turn operation optional
• Duty rate 60%, 600 starts/hour for modulating type
• Standard ISO5211 multi flange mounting
• Two auxiliary limit switches to confirm valve position, no additional brake needed
• Manual override with wrench
• Visual position indicator, flat view or convex view available
• CSA certified per UL and CSA standard/CE marked/RoHS 3.0 tested

Description

DCL 2-piece electric ball valves with thread ends are commonly used for small size pipes. 2-piece valve’s torque is commonly smaller than 3-piece ball valve. Valves have self-cleaning structure to protect sealing surface from fouling. At full close and full open position, ball and seat are isolated from pipe media, so the sealing surface will not be eroded for long time. So valves are widely used for chemical and refining industry.

Electric actuators are easily coupled to valve by ISO 5211 multi flange mounting. Electric valves are rigorous tested on plant to ensure full sealing and no stall during operation.

Specification